K-II EMF Meter Review: Is It Good for Ghost Hunting?

Photo of author
Written By Razvan Radu

Adventurer. Storyteller. Paranormal investigator. Cryptozoology enthusiast.

So, you’re gearing up for a ghost hunt? Well, a ghost hunter needs a wide range of ghost-hunting equipment. However, the EMF meter is one of the most important pieces of equipment.

Our team has tried over a dozen EMF meters. The K-II EMF Meter is one of them. It’s a handy device and a favorite among newbies and experienced ghost hunters.

Here at SpookySight, we’ve put the K-II to the test, and we’re excited to share our in-depth K-II EMF Meter review with you.


Key Features for Ghost Hunting

Most EMF meters are typically designed to detect electromagnetic fields from electrical sources (like appliances and wiring). They are not really meant to hunt ghosts.

However, what sets the K-II apart is that it’s one of the few EMF meters specifically marketed for ghost hunting. Which is quite unusual. The K-II’s direct focus on the paranormal market is also what caught our attention.

So, let’s begin our K-II EMF Meter review with a close look at some of it’s ghost hunting features:

SpecificationDetails
Frequency Detection RangeELF: 50 – 1,000 Hz, VLF: 1,000 – 20,000 Hz
MilliGauss Range1.5 mG (Green), 2.5 mG (Green), 10 mG (Yellow), 20 mG (Orange), 50+ mG (Red)
Accuracy±5% at 50-60 Hz
Response TimeInstantaneous, with real-time feedback
Power Source9V battery
Weight3.5 ounces
Dimensions5.25 x 2.75 x 1.25 inches
Display5-level LED indicator
Operation ModeSingle-axis detection
Optional FeaturesAudio alert in Deluxe model (with on/off switch and sound buzzer)
Operating Temperature-18°C to 49°C (0°F to 120°F)
Price Range$49 – $70, depending on the model and features
K-II EMF Detection Range

Multi-Segment LED Display

First off, the multi-segment LED display is a standout feature. It uses five colored lights—ranging from green to red—to indicate the strength of EMF fluctuations. Green represents low levels of EMF activity, while red indicates a strong spike.

This makes it super easy to spot anomalies at a glance. Especially in low-light conditions, which are common during investigations.

EMF Detection Range

The K-II EMF Meter detects electromagnetic fields in both the ELF (Extremely Low Frequency) range of 50 to 1,000 Hz and the VLF (Very Low Frequency) range of 1,000 to 20,000 Hz.

Why is this relevant? Because these frequencies are frequently associated with potential paranormal phenomena. Spirits may manipulate these specific frequencies to manifest.

In our experience, such a broad range can increase the chances of detecting subtle energy shifts that other meters might miss.

Instantaneous Response Time

As you probably know, most paranormal events can happen in the blink of an eye. Sometimes, you barely have enough time to react to what’s going on. So, using an EMF meter with no lag may be the difference between capturing anomalies or missing the event altogether.

Luckily, the K-II EMF Meter offers an instantaneous response time with real-time feedback on EMF fluctuations. This, again, can be an important feature when trying to make contact. No lag, no delays—just immediate results.

Accuracy

Accuracy matters to lower the likelihood of false positives. The K-II has a single-axis accuracy of ±5% at 50-60 Hz, which is solid for ghost-hunting purposes. Not amazing, but not bad either. It’s accurate enough to keep the false positives to a minimum by filtering out interference from everyday electronics.

In comparison, the Trifield TF2 has a slightly better accuracy rating (±3% at 50-60 Hz), making it more precise for broader scientific applications (which we don’t really care about).

Another popular EMF meter, the Cornet ED88T, while more sensitive, can sometimes produce false positives due to its broader frequency range.

K-II EMF MilliGauss Range

Five-Level MilliGauss Range

An EMF meter’s milliGauss (mG) levels correspond to the strength of electromagnetic fields. These numbers help investigators understand the intensity of EMF spikes.

K-II EMF Meter can measure EMF strength across five levels, indicated by the LED lights:

  • 1.5 mG (Green)
  • 2.5 mG (Green)
  • 10 mG (Yellow)
  • 20 mG (Orange)
  • 50+ mG (Red)

1.5 to 2.5 mG means normal background levels, typically found in everyday environments. 10 mG and above indicates a stronger field, which could suggest potential paranormal activity if no known electrical sources are nearby.

On/Off Button

While it may look strange to include in our K-II EMF Meter review, trust me. You can’t imagine how helpful a simple push-button on/off switch can be.

Older EMF meters typically require you to hold down the button continuously—a real hassle during long sessions. But with this design, you can set it and forget it, keeping your hands free for other ghost-hunting equipment.

K-II EMF Field Test

We Tested It in the Field

At SpookySight, we took the K-II EMF Meter on multiple ghost hunts to see how it stacks up in real-world conditions. Here are the results:

First, we wanted to understand how the K-II reacts to everyday electronics. Our office’s improvised kitchen (still a work in progress) has a few appliances: a small refrigerator, a microwave, and a coffee machine.

The only one that messed up the readings was the microwave (which was to be expected)—spiking to 50+ milliGauss. Not a bad start. That means the K-II may offer reliable readings even near certain electronic devices. But it’s not something we would recommend.

Next, we took it into the field. We tested it near a remote farmhouse, a few miles away from electronic sources. The K-II lit up, jumping from green to red. The place was abandoned… but with nothing to suggest any potential paranormal activity.

Under direct sunlight, we found it tricky to see which LEDs were illuminated. We had to shade the device with our hands to read the levels accurately. So, if you’re planning daytime investigations, be prepared for this minor hiccup.

The size of the K-II may also be an issue for some. To be honest, we expected it to be more compact—it’s about as big as an old-school mobile phone.

While not exactly pocket-sized, it’s still lightweight and easy to handle. Plus, it feels sturdy enough to withstand the bumps and drops that can happen during an active investigation.

Battery life was another aspect we monitored. The K-II runs on a 9-volt battery (included with the device), and we found it lasted through several hours of continuous use. However, we expect the battery to drain way faster in an area with more paranormal activity.

Oh, and one last thing: K-II EMF Meter is made in the US.

How K-II EMF Meter Compares to Other EMF Meters

Obviously, we can’t offer an in-depth K-II EMF Meter review without comparing it to other similar EMF meters:

FeatureK-II EMF MeterTrifield TF2Cornet ED88TGhost Meter ProMel-8704R EMF Meter
Frequency Range50 Hz – 20,000 Hz (ELF & VLF)40 Hz – 100 kHz100 MHz – 8 GHz (RF detection)50 Hz – 20,000 Hz (ELF & VLF)30 Hz – 300 Hz (EMF)
MilliGauss Sensitivity1.5 mG – 50+ mG (5 levels)0.2 mG – 100 mG0.1 mG – 1,800 mG0.1 mG – 100 mG0.1 mG – 200 mG
Response TimeInstantaneousNear-instantaneousFast but dependent on frequency rangeInstantaneousNear-instantaneous
Audio AlertYes (Deluxe version)YesNoYesYes (Mel-8704R-REM)
Visual Display5-color LEDDigital LCD with analog-like needleDigital LCD + bar graphSingle LEDDigital LCD + temperature display
Additional FeaturesCompact, affordable, 5-level LEDRF and magnetic detection, 3 modesRF detection, advanced sensitivityAffordable, simple, easy to useBuilt-in temperature, flashlight, REM
Price Range$49 – $69$169$179$29 – $39$99 – $129

What does that mean:

  • K-II EMF Meter: More basic with real-time feedback, ideal for quick setups and interactive investigations.
  • Ghost Meter Pro: Cheaper but less durable, with fewer features.
  • Mel-8704R EMF Meter: Provides temperature readings and is more sensitive but comes at a higher price and complexity.
  • Trifield TF2: Highly advanced with multiple detection modes but may be overkill for casual ghost hunting and is pricier.
K-II EMF Meter features

K-II EMF Meter Pros and Cons

Pros:

  • User-Friendly Design: The K-II EMF Meter is incredibly easy to operate, making it ideal for both beginners and seasoned ghost hunters.
  • Immediate Feedback: It’s an integral part of any paranormal investigation. When interacting with potential spirits, immediate feedback can make all the difference.
  • Accurate EMF Detection: The K-II precisely detects EMFs from active electronic devices while ignoring inactive ones.
  • Durable: Made in the USA, the K-II is built tough to withstand the rigors of field investigations. It feels sturdy and can handle the occasional drop or bump that happens during a ghost hunt.
  • Optional Audio Alerts: The Deluxe model includes subtle audio cues that notify you of EMF spikes without interfering with EVP recordings.
  • Versatile: Beyond ghost hunting, the K-II can help identify EMF “hotspots” in your home or workplace. This can be beneficial for those concerned about EMF exposure from appliances like microwaves, refrigerators, and laptops.

Cons:

  • LED Visibility Issues: One of the main drawbacks is that LED lights can be challenging to see in bright sunlight. And that’s ironic, given that the same LED display can sometimes be too intense in complete darkness, potentially affecting night vision or drawing unwanted attention during discreet investigations. I don’t know how they managed to do that…
  • Battery: The K-II runs on a 9-volt battery, and during intense investigations with frequent EMF spikes, the battery can drain faster than expected. It’s wise to carry spare batteries to avoid interruptions.
  • Size: The device was larger than we anticipated—about the size of an old-school mobile phone, which might be inconvenient if you carry multiple pieces of ghost-hunting equipment.
  • Not Waterproof: The K-II isn’t designed for use in wet conditions. There are gaps around the on/off switch where water can seep in, potentially damaging the internal components. If you need to use it in the rain, consider placing it in a plastic bag for protection.
  • Limited Advanced Features: Unlike higher-end EMF meters, the K-II lacks additional sensors like temperature or humidity readings. If you’re looking for a multi-functional device, this might be a limitation.
  • Single-Axis Detection: The meter uses a single-axis sensor, which means it detects EMFs primarily from one direction. You may need to rotate or reposition the device to capture readings from different angles.
  • No Instruction Manual: The device doesn’t have detailed instructions, only a pamphlet explaining EMFs. Beginners might need to do online research or watch tutorials to fully understand how to use it effectively.
  • No Data Logging: The K-II can’t record or log EMF readings over time. This could be a significant drawback for investigators who want to analyze data after the fact.
EMF Meter for Ghost Hunting

Price and Where to Buy

The K-II EMF Meter ranges from $59 to $69, depending on the model:

For authentic products and reliable customer service, we recommend getting it from reputable stores:

  • Amazon: Our recommendation due to its excellent reputation, convenience, and fast shipping options.
  • GhostStop: Specialized in paranormal equipment with excellent support.
  • NPC Wireless: Authorized dealer with a solid reputation.

Be cautious of counterfeit products, especially when shopping online. Stick to reputable sellers to ensure you get a genuine K-II meter.

K-II EMF Meter Review: Is It Good for Ghost Hunting?

And so we conclude our K-II EMF Meter review. Now, the big question: Is it worth it?

Well, at the end of the day, the K-II EMF Meter holds its own. It’s simple, affordable, and gets the job done—qualities that make it a solid choice for beginners and enthusiasts alike. If you’re just dipping your toes into ghost hunting or operating on a tight budget, this device is a no-brainer.

That said, for our team, the K-II felt a bit too… basic. While it’s great for initial readings and interactive sessions, it lacks some of the advanced features—like data logging, multi-axis detection, and environmental sensors—that we need for more in-depth investigations.

But don’t get us wrong—the K-II’s simplicity is also its strength. Its straightforward operation lets you focus on the experience rather than fiddling with complicated settings. For that alone, the K-II EMF Meter is definitely worth considering.